|
Post by dwayner2 on Aug 29, 2020 7:55:20 GMT -5
Oven Side Runners/Racks..... -remove the enamel baffles -you can repeat the process as described for the broiler arms above but instead of coating them with mineral oil, I heat them to remove the moisture and then spray on the gray VHT 2000° paint from the auto parts store. Then a coat of Rustoleum Silver High Heat spray paint to make them shine. Bake on the paint as instructed on the VHT can. They will stay nice a long time as long as you’ve killed the rust and heat them before painting. NOTE...anything you paint with VHT paint cannot be sprayed with oven cleaner later because it will remove the paint and get all over the oven. You will need to remove them each time you clean. That’s true for any and all painted parts on the stove. -many people prefer to re-chrome for looks and it DOES make the racks slide better. Just remember that if there is ANY pitting in the metal when it’s chromed those areas will be magnified and very noticeable. You can use the lap sander to make the rods nice and smooth but the flat ends, not so much. Estimated cost might be $50 per side. -you could also check into having them ceramic coated, though I’ve never done it. My Cousin had his muffler done that way because it holds up to the heat and you can get it done in a gray/silver color with a slightly flat finish (no gloss with ceramic paint). Nice thing there is that the semi-flat finish will help hide those pitted areas.
|
|
|
Post by vaporvac on Aug 29, 2020 18:44:35 GMT -5
Fabulous. I wish there were some way to keep these instruction at the top.
|
|