|
Post by vaporvac on Dec 16, 2015 0:50:15 GMT -5
Hello. I'm trying to adjust my plane 0' flame burner and don't find any directions for its flame height. Is it the same as a C top burner? Also, do they have the same Btus? Thanks everyone.
|
|
|
Post by timj1852 on Dec 16, 2015 14:01:50 GMT -5
My MR-9-H (model D) instruction manual states that the top burners and thermowell burner should be adjusted so that a 3/8" soft blue cone is obtained.
The tag inside the service cabinet says that the top burners are 7,000 btu if using bottled or lp gas, 9,000 btu if using natural gas.
Hope this helps, Tim
|
|
|
Post by vaporvac on Dec 16, 2015 14:05:18 GMT -5
That helps alot! Thank you. that also solves an ongoing discussion regarding the Btus. Many prior posts suggest the POF had more, but it must just be the super large one that sometimes replaces a Twell.
|
|