|
Post by vaporvac on Jun 29, 2015 17:23:40 GMT -5
Does anyone know the font and size of the burner locations and dial arrows?
|
|
|
Post by vaporvac on Jun 30, 2015 14:20:39 GMT -5
I'm good. Jeff at IPE graciously measured their screen print and gave me the heights and widths of all the lettering. The font is Old Arial. I'll post the exact dimensions if anyone is interested or just to have as a future reference.
|
|
|
Post by chipperhiker on Jun 30, 2015 17:13:22 GMT -5
Yes, please! It's good information to archive. I'm going to make this a sticky thread, vaporvac, in case anyone else needs it, and I changed the thread title a tiny bit, too.
|
|
|
Post by vaporvac on Jun 30, 2015 23:26:18 GMT -5
Jeff said the font is old arial, but I can't find one by that name. Maybe it's Helvetica on which arial is based. When I confirm, I'll revise this. I haven't figured out the points, so I'll just give the sizes in inches. width x height. oven: 1/2" x 3/16 broiler: 13/16 x 3/16 back: 1/2 x 3/16 front: 5/8 x 3/16 well; 1/2" x 3/16" Direction arrows ie. on/off for gas: I'm confused as to what I wrote. 1 1/16 x 1 1/16 on off 3/16 high. I'll have to measure that myself. The single arrows for the Tstat and timer are 5/16 high. Feel free anyone to add to this. A good scan would be appreciated.
|
|
|
Post by chipperhiker on Jul 1, 2015 13:30:19 GMT -5
Thanks, Vaporvac.
|
|